Locked Keys in Car? Here's how to unlock your car door without a key to Open Your Car Without Damage

Don't panic if your car has locked the keys in your car. You can try several tricks before calling a roadside assistance or locksmith service.

For instance, you can use a shoelace with an a slip knot to tie up a post lock or a coat hanger made of wire that you twist and then mold into a hook. You can also use an inflatable wedge or a door wedge.

Pump Wedge

If you've been trapped in a locked car and no DIY solutions like wire hangers, shoestrings or wedges work for you then it's time to call in a professional. A locksmith or repo service provider might have lockout tools that will allow you to open your car without damaging it.

Make use of them properly when they are available. Know where to insert the wedge tool. A lot of people place the wedge tool in the top corner of a door, which is the most vulnerable. This is not a good idea since you risk damaging the weather stripping and wires inside the doors. Instead, place the wedge in the largest portion of the gap that is visible and where it has the most leverage.

The Pump Wedge is an inflatable wedge made from durable vinyl that will not damage the surface. It is able to slide between the door of your vehicle and the door frame. It is pumped up to create a space that will allow you to slide in other tools such as an extended reach car opening tool rod. It also has a hook at one end that you can bend to grab the latch within the door handle.

This can be done with two wooden door stops. You can place them in the back of the car door to open the gap wide enough for rods. You can also make use of a slim Jim, a thin metal strip that is bent into a hook, and then used to secure the lock. This method is not for the faint of heart as you have to be sure not to scratch the weather stripping on your door.

A shoelace is another good option, but it works only on older vehicles that don't have a button for the unlock mechanism. You can tie a slip knot in the middle of the lace and then move it upwards and downwards through the door's seam until you find the latch. After that, maneuver the lace until it is in contact with the lock, then tighten the slip knot, and pull it upwards. This method is more difficult and could scratch the paint on the door or dent the trim if not careful.

Inflatable Wedge

If you own an inflatable wedge-shaped car door opener, you'll be able to easily unlock your car without the necessity of prying or slim jim tools. These wedges can be placed between the window and frame of the car and, when inflated, create a large opening to insert a tool that has a long reach such as a button grabber or slim jim. This method is safer than using tools to pry and is suitable when you do not have an screwdriver.

A coat hanger that is wired into a hook is a different option to unlock cars without causing damage to the exterior or interior. This can be used to grab the lock and could be more effective than a flat screwdriver because it is less likely cause damage to the paint of the vehicle. It is still recommended to examine the other doors to ensure there's no other means to gain access.

You can also try using a plastic bag that has been twisted into a v-shaped or noose-like shape, but you'll need to be careful not to tear it since it could make your situation even more complicated. This trick can be especially effective if you are unable to find the button for locking. This trick is not as effective as a wedge, or a coat hanger, but it could assist you in a pinch.

Stay at peace and always put safety first. Luckily, there are several options to solve this kind of problem, and if you study this article, you'll be prepared for any situation that comes your way. You can unlock your vehicle by following our instructions. This will avoid unnecessary stress and damage. And of course, if you can, always be sure to take your keys when leaving your vehicle.

Shoelace

It's one of the "oh crap!" moments that can cause a lot of trouble. In the event of an emergency, it's best to keep a few items at hand to help you unlock your vehicle without damaging the windows. Some of these items are simple to locate and could save you the expense of hiring a locksmith or waiting for roadside assistance to arrive.

A shoelace, or twine, can be an excellent tool for unlocking the car. It's simple to use and can be used on a variety of cars. This method is only applicable to cars with post locks. They stack vertically on the window sill and are easily accessible from the outside of the vehicle. To get the job done you need to use a shoelace to make a slip knot and move it into the crack between the door and window frame. Once the slip knot is set in the right place, pull both ends of the string upwards to loosen the lock.

This technique may only work on older models that have a hooked lock out of car. If you have a screwdriver in your possession you can use it to unlock the door more forcefully. You can also use a rod that you can pull from a nearby object, such as an old doorframe, or even a piece wood, to attach to the window frame. This will create space for an object to push the interior locking button.

While the methods mentioned above are generally safe for the majority of drivers, it's best to call for assistance if possible. This will stop any further damage to the vehicle and it can also lower the risk of an accident that is caused by the stress of the situation. If you do not have a phone with a mobile number or are unable to call for help it is essential to always let trusted family members and acquaintances know where the vehicle is. Also, a spare set of keys could be stored in an easily accessible spot on the vehicle, so you can access them when needed.

Wire Hanger

There is no doubt that locking your keys in your car could be a very frustrating situation. However, the trick is to remain calm and think through the options to get them back. This will prevent you from making the problem worse which can occur when you panic.

One of the most effective options is to utilize a modified coat hanger to get back in your vehicle. You will need to uncoil the coat hanger so that it has a straight slant and a hook that you can use to manipulate the lock rod inside of your door. Once you are able to reach the rod of your lock out my car, you should be capable of pulling it up to open the door.

Another option that you can explore is to use a rod or even an element of metal from the body of your vehicle. It is essential to ensure that you don't cause any damage to the vehicle in this procedure, and it is best if you can do so without having to take the car unlocking service apart. This method is more effective on older cars than on modern ones. However it can be utilized on models with unique outer door handles.

You can do similar things using the shoestring tied in with a slip knot. It can also be used on a post lock, however it is somewhat more difficult to maneuver since you will depend on the tension of the string to grab the lock. You can do this by threading a shoestring into the tiny hole in the weatherstripping of the doors of your vehicle. After the string is in, you can pull it tightly to create a loop that should snap around the lock and allow you to take it off. This method can be extremely efficient if you're lucky enough to locate the lock in the correct spot.