Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and comfortable method of heating your home without harmful gases or soot. They are easy to install similar to an electrical fire.

The BARDA-funded contract supports development of the BioFire Emerging CoV Panel, which is a nucleic acid amplification test for use with BioFire FilmArray Systems for detecting human coronaviruses, both emerging and known, in nasopharyngeal and oropharyngeal sw and saliva specimens.

Eco-friendly

A bioethanol fire is a great eco-friendly alternative to gas or wood fires. The fuel is made from plant by-products and uses a natural process to convert sugars into alcohol. It has many benefits over other fireplace types that include no harmful emissions and a much smaller carbon footprint. bioethanol fuel fires is also a safer option than other fires, as it does not produce smoke or soot. It doesn't require a flue, and can be used anywhere in the home or garden.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. Fortunately, modern testing methods can help identify MDR bacteria and other infections earlier to avoid further complications. BioFire FilmArray is one such test. This test employs the symptom driven approach to identify pathogens that may cause sepsis. The results are available within an hour, so doctors can start treatment immediately.

The process of Molecular PCR that amplifies DNA or RNA molecules into millions to billions of copies. This allows the analysis of small amounts of body fluids or tissues to determine if certain genetic sequences are present. It is a useful tool for laboratory professionals, and it can help them diagnose serious diseases in a quick and cost-effective manner. The BioFire FilmArray PCR system is a cutting-edge instrument for diagnosing infectious diseases, and it can be used in a myriad of applications in laboratories and hospitals.

In the case of respiratory tests, a simple swab can be wiped across your nose and sent to the lab for analysis. BioFire’s system allows clinicians to take action quickly and with a short turnaround time. This means fewer waiting for results and improved outcomes for patients.

The Chanouf Farm Biofire company has created an Agroforestry waste recycling unit that makes use of olive and pear tree waste to produce organic charcoal and biomass energy. The resulting products are then sold to the general public as a green alternative to traditional coal briquettes and wood charcoal. In addition the bio-waste products can be burned in the Kachelofen fireplace which produces radiant heat that is greener than electric and gas-fired fireplaces.

Clean burning

By using a bio-fire, you will not only save energy, but also help the environment. The combustion of bioethanol fireplace suite does not produce harmful gases like carbon dioxide. Instead, it releases water vapour and heat. This makes it a safer and cleaner option for indoor use.

Ethanol can be made by fermenting sugars from plants. It is an energy source that can be used in the future. This means that it can be produced in a short time and will not run out as fossil fuels such as coal and oil. The use of bioethanol can also help reduce the dependency on foreign imports and reduces the risk of supply shortages.

Bio-fires are simple to install and can be installed in existing fireplace openings, or as a freestanding unit. This makes them a great alternative to gas and wood fires. They are also ideal for offices and homes without a chimney or flue.

When a bio-fire is lit the burner is outfitted with a special material that absorbs the liquid ethanol fuel and makes it ready for combustion. The ethanol biofuel fires fireplace bioethanol (Healinglamping.co.kr) is burned by the flames and the vapours are expelled out into the atmosphere through the vent. This gives the flames a more natural look and a stunning beauty that cannot be duplicated by wood or gas fires.

Bio-fires benefit from not needing a vent or flue to replenish oxygen used during combustion. They also don't create carbon monoxide, which is required to be vented out into the room in gas fires that are open-fronted.

The BioFire Respiratory panel makes use of multiplex PCR to simultaneously test for respiratory pathogens. It takes around an hour. This enables doctors to identify and rule out respiratory illnesses quicker than they could by using standard tests that require patient visits. This means less time and more money for both patients and the health healthcare system.

Safe indoors

Bio-fires are able to be used indoors more safely than traditional fires since they don't release smoke, ash, or carcinogenic fumes. The bio-fires don't produce carbon monoxide which is deadly if inhaled. The bio-ethanol fuel that they use is flammable, however, and you should take great care when managing the burner and refilling your fire. The fuel should only be added after the burner has been switched off and your fire has been cooled. Any spills should be cleaned immediately.

The company's diagnostic FilmArray systems - BioFire 2.0 and BioFire Torch--are easy to use and run eight different commercially available US Food and Drug Administration approved diagnostic panels as well as three additional panels that have been cleared for use in emergencies and six environmental test panels. The tests include a revolutionary respiratory panel that has been designed to quickly identify and discriminate between respiratory illnesses including COVID-19 as well as emerging coronaviruses.

The COVID-19 panel was awarded a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based method, allowing clinicians to distinguish between the symptoms caused by COVID-19 and other respiratory infections with the same precision as the current rapid antigen tests in use.

Additionally the company is in the process of developing a SARS-CoV-2 assay for its Respiratory 2.1 Panel. This multiplexed nucleic acids amplification test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens using nasopharyngeal and saliva samples in less than an hours. The assay will be developed in an extremely short time frame, and FDA approval for EUA and the 510(k) will be scheduled to be granted by Q3 2020.

While bio-ethanol flame-effect fireplaces are extremely safe to use, they should be kept away from combustible materials like blankets, curtains and cushions. They should not be placed close to anything that could catch fire. Keep flammable materials away from the flame-effect fires by at minimum 10 feet. The bioethanol fuel must be stored in a dry, secure area where it cannot be easily accessible by children or pets.

Simple to use

A bioethanol fireplace is easy to operate and doesn't have a flue to worry about. All you require is a secure location to place it in and some fuel. After you've filled the burner, light it. This will create an appearance of a flame like an actual fire. Once the flame has started, it will heat the room, but it will emit minimal or no smoke. It also produces heat, similar to a fireplace that burns wood. Bio fires are also easy to maintain and don't need any servicing other than a quick wipe down.

Unlike most rapid tests, the BioFire RP2.1-EZ test uses a syndromic method to identify common symptoms of infectious diseases and can return results within 45 minutes. The test is designed for patients suffering from respiratory symptoms that are upper respiratory and has a 98% accuracy rate. The test can identify up to 19 bacteria and three viruses in one test which makes it a good choice for patient management.

The BioFire platform combines multiplex testing, sample preparation, and result reporting in one integrated platform. This helps laboratories to streamline their workflow and eliminates the requirement for a sequential process that involves individual and send-out test. This could lead to improved outcomes for patients by allowing the right test to be administered the first time, and by removing the need for expensive tests that are based on a culture. The BioFire system can detect pathogens at the cell level as well as their antimicrobial resistance gene. This information is more sensitive than the conventional methods.

Molecular diagnostics are increasingly being used to improve patient care and outcomes. The BioFire panel RP2.1+ employs an syndromic technique to simultaneously target 23 pathogens commonly implicated in respiratory infections. The test can be run on the BioFire FilmArray 2.0 and Torch systems, and results are available in approximately 45 minutes.

This assay is available in the US under FDA Emergency Use Authorization. It will be available commercially following the initial DoD demands are satisfied. Additionally, the BioFire Defense Team has created an automated, sample-to-result assay that allows for the quick identification of COVID-19. The test is in the process of development and will be available once initial DoD demand is met.