Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If windows with double glazed window repairs panes are joined by internal beading, it is harder to remove and replace the old panes. In this case, you will need to locate some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan to try to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window repairs near me is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. You'll first need to open the windows to access the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. Most often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose upvc window Repair handle. First, you'll need to shut the window and do an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change a window hinge however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. It is recommended to do this once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause an opening to appear where the sash meets the frame. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them re-aligned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. They can keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your upvc window repair near me window you should consult a professional immediately.