Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you might be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash windows repair. However, with time, they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll have to open the window to get to the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you can't reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close your window and do an initial test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to act if you get up each morning to find a smoky wall and floors that are wet. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be put on. When it comes to uPVC repair, you must avoid over-caulking. This will make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazing repairers-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's easy to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give assistance.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also lower the chance of windows sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges, also due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. If they're beyond repair, it might be necessary to get them re-aligned. The interlock may also become unbalanced. This happens on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace these.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window repairman near me sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window glass repair near me it is recommended to speak with a professional as soon as possible.